Iron Gates Phoenix
Iron Gates Phoenix: Custom Iron Gates & Wrought Iron in Phoenix, AZ
Custom gates, driveway gates, wrought iron fence, pool barriers and security doors, measured, built and hung by one local crew.
Iron Gates Phoenix
Custom gates, driveway gates, wrought iron fence, pool barriers and security doors, measured, built and hung by one local crew.
Iron Gates Phoenix has welders and installers for custom iron gates, driveway gates, wrought iron fence and security screen doors across Phoenix. We also build iron pool fence and repair gates that sag, stick or rust.
Every Phoenix iron gate we build starts with a tape measure, not a catalog. We check the width, the slope under the swing, and what the gate hangs from: a block pillar, a steel post or a stucco wall.
Then the gate is drawn, welded from steel tube and bar, and finished in powder coat or paint. You see the drawing before any metal is cut.
Gates come first, because that is what most Phoenix homeowners call about. Fences, pool barriers, security doors and repairs follow.
Courtyard, entry, side-yard and garden gates designed to your opening, then welded, powder coated and hung.
Explore custom iron gates in Phoenix
Swing and sliding driveway gates with gate operators, keypads, remotes and safety sensors wired in.
Explore driveway gates & gate operators in Phoenix
Front-yard, view and wall-top wrought iron fence with posts set in concrete and pickets sized to the job.
Explore wrought iron fence in Phoenix
Permanent iron pool barriers with self-closing, self-latching gates built to Phoenix pool barrier rules.
Explore pool fence in Phoenix
Steel security screen doors for front entries, French doors and patio sliders, with screen and lock options.
Explore iron security screen doors in Phoenix
Sagging gates, broken welds, worn hinges, rusted posts, failed gate openers and faded paint repaired on site.
Explore gate & fence repair in Phoenix
| You want | Service | What we do |
|---|---|---|
| A gate with a look of its own | Custom iron gates | Courtyard, entry and side-yard gates drawn and welded to the opening |
| A gate the car can pass through | Driveway gates and gate operators | Swing or sliding gates, operator, keypad and safety sensors |
| A fence you can see through | Wrought iron fence | Front-yard, view and wall-top fence with posts in concrete |
| A barrier around the pool | Pool fence | Iron barrier and self-closing, self-latching gates |
| Air through the front door, not intruders | Iron security screen doors | Steel frame, screen and lock set for entries and patios |
| A gate that drags or won't latch | Gate and fence repair | Rehang, reweld, new hinges, posts, paint or operator repair |
Every opening is measured on site before we recommend anything. We don't quote over the phone.
Square steel posts set deep in concrete, plumb before the footing cures, so a heavy gate doesn't lean the post over time.
Clean ground welds under an even powder coat or paint, with no pinholes where rust can start.
Self-closing hinges and self-latching hardware set at the right height, which pool gates require.
Adjustable hinges and an even gap over the path, so the gate clears the ground and lines up with the latch.
Tell us what you want built or fixed. We'll measure the opening and send a drawing and written estimate.
Free estimate, no obligation
Ask each company how deep the posts go, what the gate frame is made of and how the finish is applied. Those three answers decide whether a gate still swings true in ten summers.
Ask who builds it too. A shop that welds and installs its own work can adjust a gate on site instead of sending it back.
Arizona law requires a call to Arizona 811 before anyone digs, and locators get two full working days to mark the lines. We open the ticket before every post hole or gate footing and don't dig until the marks are down.
Yes. Every gate is drawn to your opening, then cut, welded and finished before install. That includes courtyard and entry gates, side-yard gates, arched gates and steel gates with wood slats.
Yes. We install gate operators on new and existing swing and sliding gates, with keypads, remotes and safety photo eyes. We check the gate swings freely by hand before an operator goes on.
The City's pool policy calls for a non-climbable barrier at least five feet high, self-closing and self-latching gates, latches four and a half feet above the ground and openings under four inches.
Yes. Sagging gates, broken welds, rusted posts, worn hinges and failed gate openers make up a big share of our work.
Homes across the city, including Paradise Valley Village, Camelback East, Encanto, Maryvale, South Mountain and North Mountain.
A side-yard gate and a full automated driveway entry both start with a measure. Call 602-905-4842 or request an estimate online.
Free estimate, no obligation.