Wide black steel sliding driveway gate with horizontal slats across a concrete driveway between block pillars at a single-story Phoenix, Arizona ranch home, a gate operator box mounted low on one side, clear blue sky

Phoenix Driveway Gates

Driveway Gates in Phoenix, AZ

Swing and sliding driveway gates, with gate operators, keypads and safety sensors wired in.

Driveway Gates and Gate Operators for Phoenix Homes

Iron Gates Phoenix has crews that build and install driveway gates in Phoenix, from manual swing gates to automated sliding gates. Driveway gates in Phoenix have to deal with long, open driveways, monsoon wind and summer heat that is hard on operators.

The first choice is swing or slide. A swing gate needs clear room behind it to open; a sliding gate needs room along the wall or fence to roll back.

Then we size the operator to the gate's weight and length, plan power and add photo eyes so the gate stops and reverses if something is in the way.

Get a Free Estimate

Black iron swing driveway gate panels opening inward on a long gravel drive lined with desert trees, viewed from the street

Parts of a Driveway Gate System

Steel sliding driveway gate riding on a ground track with a V-groove wheel, block wall beside it, close angle

Sliding gates

A single panel that rolls on a track or cantilevers off rollers, good for short or sloped driveways.

Pair of black ornamental iron swing driveway gates with a gentle arch meeting at the center over a paver driveway

Swing gates

Single or double gates that swing inward, often with an arch or scrollwork to match the house.

Gray metal automatic gate operator unit mounted on a concrete pad beside a sliding steel gate, drive chain visible, no labels

Gate operators

Swing arms or slide operators sized to the gate, with battery backup options for outages.

Black keypad entry post with a small blank keypad beside a concrete driveway in front of a closed iron gate, no readable text

Keypads and remotes

Keypad posts, remotes, phone-based openers and an exit loop or sensor for cars leaving.

Swing vs. Sliding Driveway Gates

	Swing gate	Sliding gate
Space needed	Clear arc behind the gate	Wall or fence length beside the opening
Slopes	Driveway must fall away from the swing	Handles uphill driveways better
Wind	Large solid panels catch monsoon gusts	Less affected by wind
Look	Classic, arched and double designs	Clean modern lines or picket styles

Gate Operator Safety

Every automated gate we install gets safety devices so it won't close on a car, a pet or a person. We test the reverse function in front of you at the end of the job and show you the manual release.

Arizona law requires a call to Arizona 811 before anyone digs, and locators get two full working days to mark the lines. We open the ticket before every post hole or gate footing and don't dig until the marks are down.

Driveway Gates & Gate Operators Questions

Can you add an operator to my existing driveway gate?

Often, yes. The gate has to swing or roll freely by hand first, so we may rehang it or replace hinges or rollers before installing the operator.

Is a sliding or swing gate better for my driveway?

It depends on the space beside and behind the opening and on the slope. We'll show you both on site and point out which one fits.

What happens to an automated gate in a power outage?

Every operator has a manual release, and many models can run on a backup battery for a while.

Do you run power to the gate?

Operators need low-voltage or line power at the gate. We plan the route during the measure and coordinate any electrical work.

Get a Free Driveway Gate Estimate

Tell us the driveway width and whether you want it automated. We'll measure and plan the gate and operator.

Call 602-905-4842

Free estimate, no obligation